UZIN CX 30 Powerflex Project Plus Advanced S1 Thinset Mortar

High performance polymer-modified 4-in-1 mortar

Data sheet

UZIN CX 30 is an advanced-professional quality, special cement-based, polymer modified non-sag mortar for the installation of most large format porcelain, ceramic, quarry, glass, mosaic and natural stone in interior, exterior, freeze/thaw and immersion conditions. UZIN CX 30 can also be used for applications involving uncoupling membranes and UZIN waterproof membranes.

Applications

Large Format Porcelain, Ceramic, Quarry, Saltillo, Glass, and most types of stable natural stone
Over properly prepared concrete, masonry, cement mortar beds and leveling coats
Over tile industry recommended backerboards
Over gypsum wallboard (interior)
Over industry standard plywood (interior, dry conditions)
Over radiant heated substrates
Over properly prepared, stable and well bonded ceramic tile, vinyl floorcoverings, cutback adhesive (interior, dry conditions)
Over UZIN brand surface preparation products and membranes where applicable
For the installation of tile and uncoupling systems in interior dry conditions only. For exterior applications, see UZIN Balkuslim system
For interior and exterior, residential and commercial applications,exceptional freeze-thaw properties
For pools, spas, plazas, walkways and applications subject to immersion water saturation and freeze/thaw
For use as a skimming or patching mortar for preparing substrate voids and depressions up to 3/8" (10 mm)

Properties

Fine textured raw materials - Smooth handling. Passes through small notch trowels when required. Superior mechanical adhesion
1 component - Water additive only, no latex additive required
Improved workability - Easy remixing and application. Working times favorable for many climatic and jobsite conditions
Industry leading coverage - Smaller bag, easier mobility, less bags to transport
Outstanding Sag Resistance - Excellent vertical hold properties. Outstanding horizontal positioning and adjustability

Downloads

UZIN_PDS_CX-30_22-12Dec-09 2 MB
Product Data Sheet UZIN CX 30 - Spanish 403 KB
Product Data Sheet UZIN CX 30 - French 404 KB
Surface Preparation Recommendations 205 KB
Thinset Mixing Technology 679 KB
Safety Data Sheet - UZIN CX 30 - EN 348 KB
VOC Certificate SCS-IAQ-08155 269 KB

Technical data

* At 70 °F (21 °C) and 65 % relative humidity. Temperature, conditions and surface porosity will affect dry time
Packaging	40 lb. (18 kg) paper bag
Storage	12 months in warm, dry conditions
Mixing ratio	refer to product packaging
Color	Available in gray & white
Coverage	Per 40lb (18 kg) – 1/4" x 1/4" x 1/4" (6 mm x 6 mm x 6 mm) = 105-115 sq. ft (7.5 – 8 m²) ; 1/4" x 3/8" x 1/4" (6 mm x 10 mm x 6 mm) = 66 – 77 sq. ft (5.5 – 6 m²) ; 1/2" x 1/2" x 1/2" (12 mm x 12 mm x 12 mm) = 50 – 60 sq. ft (3.5 – 4 m²)
VOC	0 g/L
Application temperature	40 – 95 °F (5 – 30 °C)
Working time	Up to 2.5 hours; 30 minutes open time
Ready for foot traffic	walls: 6 hours / floors: 12 hours^*