UZIN HS 100

UZIN HS 100 Premium - Tile & Stone Waterproof Membrane

Flexible acrylic polymer waterproofing membrane

Data sheet

UZIN HS 100 is a flexible, ready to use acrylic polymer based waterproofing membrane for tile and stone in interior & exterior non-submerged applications. Used as crack-isolation membrane UZIN HS 100 also reduces crack transmission in tile and stone floors

Applications

Over properly prepared concrete, masonry, cement mortar beds and leveling coats
Over tile backerboards (with approved seam tape)
Over gypsum wallboard (interior)
Over industry standard plywood (interior, dry conditions)
Over radiant heated substrates
Over UZIN brand surface preparation products where applicable
With UZIN WP Accessories for a complete waterproofing system. See UZIN WP Accessories PDS for items and additional installation detail
For floor, wall and ceiling applications in residential, commercial and institutional conditions
Suitable applications include showers, tub surrounds, bathrooms, laundry, food service, exterior walls and building facades, shower pans, staircases, staircase landings and wet rooms
For use in steam rooms and steam showers providing there is an intact vapor barrier behind the backerboard. If unsure, use UZIN WP Hydrostop
For contact with plumbing rated PVC, copper, brass and stainless steel pipe penetrations, lightly abrade the surface
For overlapping contact with Schluter® Kerdi series products such as Kerdi Drain, Kerdi Curb, Kerdi Board and other Schluter® components
For immersion applications such as pools, spas and fountains, use UZIN HS 200
For preventing in-plane floor cracks from transmitting through tile or stone
For filling gaps and changes in plane to floor and wall joints up to 1/8" (3 mm)
For use in conjunction with breathable fiber reinforcing meshes

Properties

Smooth texture and easy handling - Fast, seamless application with roller, trowel or brush
Ready-mixed one-component - No mixing, use only what is necessary
UPC Listed for Shower pan liner - Plumbing code performance validation
No mesh required to meet ANSI A118.10 - Labor and cost savings, Surface uniformity
Fast curing - Same day tile installation
Rectangle pails - No paint tray required, just dip and go
Light green color - Easy to see reference marks
Non-sag, filling properties - Use as a gap filler up to 1/8” (3mm)

Downloads

Technical data

* At 70 °F (21 °C) and 65 % relative humidity. Temperature, conditions and surface porosity will affect dry time.
Packaging	1 gal (5.49 kg /3.78 liters) 2.5 gal (13.72 kg /9.46 liters)
Storage	minimum 24 months
Color	light green
Coverage	45 – 47 sq. ft. (4.0 – 4.5 m²) per gallon at 2 coats
VOC	< 1 g/L
Application temperature	40 – 95 °F (5 – 30 °C)
Setting time / cure time	1st coat approximately 30 – 60 minutes 2nd coat approximately 1 – 2 hours Flood test 4 hours after 2nd coat has dried