UZIN VCT 7

UZIN VCT 7 Premium – VCT Adhesive

This product is only available in select markets. Please contact your local UZIN Representative to learn more.

For the fast installation of VCT

Data sheet

UZIN VCT 7 is a clear thin-spread adhesive that provides a fast, strong bond for VCT installations to receive light traffic immediately after placement.

Applications

Interior use only
Concrete substrates up to 90% RH
Absorbent and non-absorbent substrates
VCT
Use over well bonded VCT
Use over Securely attached APA underlayment grade plywood and OSB
Use over new or old cement based self-leveling compounds and patching compounds
Use over well bonded cutback adhesive residue*
Use over Terrazzo & VCT (properly prepared with all waxes and surface finishes removed)
Residential and commercial applications
Use with radiant floor heating systems

*See “Substrate Preparation” for additional information

Properties

Releaseable initial bond • Easy adjustment & repositioning of VCT
Moisture resistant • For use up to 90% RH
Quick bond development • Can receive light traffic immediately
24 hour working time • Allows for convenient installation

Downloads

Product Data Sheet UZIN VCT 7 566 KB
Safety Data Sheet UZIN VCT 7 259 KB
UZIN_PDS_VCT7_ES_22-07Jul 806 KB
UZIN_PDS_VCT7_FR_22-07Jul 801 KB
VCT_7_GreenLabelPlus-Cert 723 KB
UZIN_Certification_Greenguard_VCT7_4gal 651 KB

Technical data

*Coverage is approximate and could vary depending on substrate porosity and the angle at which trowel is held. It is the sole responsibility of the contractor / installer to determine the proper porosity of the subfloor, apply the proper amount of adhesive for the job conditions and ensure that all instructions, procedures and practices are strictly adhered to. **Flash time and working time may vary based on temperature, humidity, substrate porosity, trowel size and jobsite conditions.
Packaging	4 gal. / 16.6 kg / 15.1 l plastic pail
Storage	min. 24 months (protect from freezing)
Color	beige
Coverage	880-1,200 sq. ft. / pail (4 gal.)* 81-111 m² / pail (4gal.) 220–300 sq. ft. / gal.* 20–27 m² / gal.
VOC	< 15 g/L
Flash time	15–60 mins^^
Working time	approx. 24 hrs^^
Ready for foot traffic	immediately
Ready for covering	see flash time
Minimum application temperature	60 °F (15 °C) at floor level
Final strength	approx. 48 hrs
Fire reaction	non-flammable
Frost resistance for 3 cycles	10 °F (-12 °C)