New
A 3 gallon bucket of MK 1000 Premium STP-Wood Floor Adhesive. The bucket has a blue lid and a prominently displayed product name on the front label, including descriptions in English, French, and Spanish. It's designed for adhering wooden floor installations, highlighting its premium quality and specialized formula.

MK 1000 Premium - Wood Flooring Adhesive

1-component, solvent and water-free STP wood flooring adhesive

This single-component, silane-terminated polymer (STP) wood adhesive is solvent-free and water-free, delivering strong bonding for hardwood flooring installations. With moisture control up to 80% RH, it helps safeguard against environmental conditions.

 

Formulated for solid wood flooring up to 5” wide, it maintains flexibility while ensuring secure adhesion. It is also suitable for engineered wood flooring up to 9” wide, providing versatility for various installation needs.

Applications

  • Prefinished and unfinished engineered wood flooring
  • Solid tongue & groove strip and plank
  • Exotic species
  • Wood flooring on radiant heat systems
  • Wood flooring on most subfloors with adequate strength such as concrete, fortified gypsum, plywood, and OSB
  • For professional use only

Properties

  • Moisture control up to 80% RH
  • Approved up to 5” wide solid wood flooring
  • Engineered wood flooring up to 9” wide
  • Approved for use over radiant heat systems
*At 70°F (21 °C) and 65% rel. humidity. Coverage is approximate and could vary depending on substrate porosity and the angle at which trowel is held. It is the sole responsibility of the contractor/ installer to determine the proper porosity of the subfloor, apply the proper amount of adhesive for the job conditions and ensure that all instructions, procedures and practices are strictly adhered to.
Packaging

3 gal. / 11.4 l plastic pail

Storage

min. 12 Months

Color

Beige

Coverage

195-255 sq.ft. per pail*
65-85 sq.ft per gal*
(see details in coverage chart)

For 80% RH allowance
using B-11 trowel
195 sq.ft per pail*
65 sq.ft. per gal*

Drying time

Foot traffic, 8-10 hours,
Furniture 24 hours

Working time

up to 1 hour*

Minimum application temperature

Min. 60-85 °F (15 - 25 °C)
Min. 60°F (15 °C) at floor level

Grindable

after 24 hours*

Frost resistance for 3 cycles

-13 °F ( -25 °C)

Article number Article Packsize
UZIN MK 1000 *hide*
LEED contributing pruduct_GB_Label
SCS_IAQ_IAG[Building Materials]_1CG

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools