UZIN NC 182 MT

UZIN NC 182 MT Premium Plus - Moisture Tolerant, Low Slump, Patching and Repair Compound

Fast-setting, Portland cement-based repair compound for use at any depth

Moisture tolerant, fast setting, low slump, patching and repair compound for use at any depth. Fast-drying, Portland cement-based, high strength, easy to sand compound suitable for most floor coverings, including wood products, and in areas with heavy wear demands. Ideal for filling holes, cracks and making general surface repairs to concrete substrates. It is also recommended for smoothing and repair work on concrete stairs and ramping transition areas.

Applications

Interior use only
Use over Portland cement-based and gypsum based leveling compounds
Use over well bonded adhesive residues including cutback adhesive*
Use over securely attached plywood, OSB, or other suitable wood substrates
Residential and commercial applications
Use with radiant ﬂoor heating systems

_{*See “Substrate Preparation” for additional information.}

Properties

Moisture tolerant • Unaffected by moisture vapor up to 100% RH
Versatile formula • Applies from 1/32" to unlimited
Fast setting • Cover ready in as little as 1 hour

(depths <3/8")

Fine aggregates • For use as a skim coat
Very high compressive and tensile strengths

• Exceeds most covering manufacturer recommendations

Downloads

Technical data

*At 70 °F (21 °C) and 50% relative humidity. Surface profile and porosity, application depth, temperature, and humidity will affect dry time and coverage. ** In original unopened packaging, when stored indoors in dry, moderate conditions between temperatures of 50F - 90F (10C - 32C).
Packaging	20 lb. (9 kg) paper bag
Storage	up to 12 months^^
Water quantity	2–3 quarts (2–2.8 liters) per 20 lb. (9 kg) bag
Color	gray
Coverage	see coverage chart
VOC	0 g/L
Working time	15-30 minutes^*
Ready for foot traffic	45 minutes. (depths < 3/8")^*
Ready for covering	1 hour. depths < 3/8" (9 mm)^* 1-3 hours depths between 3/8"-3/4" (9 mm-18 mm)^* 18 hours for wood flooring^*
Minimum application temperature	50 °F (10 °C) at floor level
Strength	compressive: 4,300 at 28 days (ASTM C109) flexural: 1,000 psi at 28 days (ASTM C348 )

Ordering information

Article	Article number	Packsize	Shipping unit
UZIN NC 182 MT	77350	hide	Pallet : 72

Quality seals and badges

Support

UZIN IN YOUR AREA

Newsletter