UZIN CX 33 BiTurbo

UZIN CX 33 BiTurbo Premium Pro - Advanced Rapid Setting S1 Thinset Mortar

High performance polymer-modified rapid 4-in-1 mortar

Data sheet

UZIN CX 33 BiTurbo is an advanced-professional quality, special cement-based, polymer modified non-sag rapid mortar for the installation of most porcelain, ceramic, quarry, glass, mosaic and natural stone in interior, exterior, freeze/thaw and immersion conditions. UZIN CX 33 BiTurbo can also be used for applications involving uncoupling membranes and UZIN waterproof membranes. For more details regarding membrane applications consult UZIN’s technical service.

Applications

Porcelain, Ceramic, Quarry, Saltillo, Glass, and most types of stable natural stone
Over properly prepared concrete, masonry, cement mortar beds and leveling coats
Over tile industry recommended backerboards
Over gypsum wallboard (interior)
Over industry standard plywood (interior, dry conditions)
Over radiant heated substrates
Over properly prepared, stable and well bonded ceramic tile, vinyl floorcoverings, cutback adhesive (interior, dry conditions)
Over UZIN brand surface preparation products and membranes where applicable
For the installation of tile and uncoupling systems in interior dry conditions only. For exterior applications, see UZIN Balkuslim system.
For interior and exterior, residential and commercial applications,exceptional freeze-thaw properties
For use as a skimming or patching mortar for preparing substrate voids and depressions up to 3/8" (10 mm)

Properties

Fine textured raw materials - Smooth handling. Passes through small notch trowels when required. Superior mechanical adhesion
1 component - Water additive only, no latex additive required
BiTurbo Technology - Efficient use of water allowing for reliable set times even at cooler temperatures
Improved workability - Easy remixing and application. Working times favorable for many climatic and jobsite conditions
Variable water range - Control viscosity to preferred workability
Industry leading coverage - Smaller bag, less to transport
Outstanding sag resistance - Excellent vertical hold properties. Outstanding horizontal positioning and adjustability

Downloads

Product Data Sheet UZIN CX 33 2 MB
Product Data Sheet UZIN CX 33 - Spanish 398 KB
Product Data Sheet UZIN CX 33 - French 396 KB
Safety Data Sheet - UZIN CX 33 BiTurbo White - EN 266 KB
Safety Data Sheet - UZIN CX 33 BiTurbo Gray - EN 266 KB
CX_33_Surface-Preparation-Recommendations_USA_0118 205 KB
CX_33_Thinset_Mixing-Technology-Flyer 679 KB
VOC Certificate SCS-IAQ-08155 377 KB

Technical data

* At 70 °F (21 °C) and 65 % relative humidity. Temperature, conditions and surface porosity will affect dry time
Packaging	27.5 lb. (12.5 kg) paper bag
Storage	Minimum 12 months in warm, dry conditions
Color	Available in gray & white
Coverage	Per 27.5lb (12.5 kg) 1/4" x 1/4" x 1/4" (6 mm x 6 mm x 6 mm) = 57 – 63 sq. ft (5.4 – 5.9m²) 1/4" x 3/8" x 1/4" (6 mm x 10 mm x 6 mm) = 33 – 39 sq. ft (3.1 – 3.6 m²) 1/2" x 1/2" x 1/2" (12 mm x 12 mm x 12 mm) = 28 – 33 sq. ft (2.6 – 3.0 m²)
VOC	0 g/L
Application temperature	40 – 95 °F (5 – 30 °C)
Working time	Up to 45 minutes - 20 minutes open time
Ready for foot traffic	approximately 2.5 hours