UZIN WK 222 Premium Pro - Solvent-Free Contact Adhesive

Water-based contact adhesive for all common types of floor coverings

UZIN WK 222 contact adhesive is a non-flammable, solvent-free, water-based, contact adhesive. Easily applied with brush or roller, the short open time produces a powerful bond, immediately upon contact. UZIN WK 222 has very low odor, which makes it ideal for use in occupied buildings such as hospitals, medical facilities, schools and residential homes. Used for bonding transition profiles, vinyl and rubber wallbase, stair treads, as well as all common types of floor coverings including carpet. 


  • Interior use only
  • Absorbent and non-absorbent substrates
  • Use over leveling compounds, wood, chipboards, OSB boards
  • Vinyl and rubber wall base, stair treads, transition profiles, flash coving, sheet vinyl, linoleum and rubber
  • All textile floor coverings or woven carpets
  • Repair work on seams and covering difficult surfaces
  • Heavy-duty use in residential, commercial, industrial and sports facility applications
  • Use with wet shampooing and spray extraction cleaning
  • Use with radiant floor heating systems


  • Solvent-free • Install in occupied areas 
  • Powerful bond strength • Ideal for difficult to bond products
  • Fast roller sleeve application • Easy to apply
  • Minimum application amounts with supplied application sleeve • High coverage
  • High resistance to plasticizers • Use with all solid vinyl flooring

Technical data

*At 68 °F / 20 °C and 65 % relative humidity. Coverage is approximate and may vary depending on substrate porosity. Flash time, is the waiting time required before installing flooring. Working time, is the window of time for the adhesive to accept flooring. Note: Flash time and working time may vary based on temperature, humidity, substrate porosity, application amount and jobsite conditions.

1.4 gal. / 6 kg / 5.5 l plastic pail


min. 12 months




Coverage when applied to both surfaces
144–216 sq. ft. / pail (1.4 gal. / 6 kg / 5.5 l)*
13.3–20 m² / pail (1.4 gal. / 6 kg / 5.5 l)


< 15 g/L

Flash time

20-40 minutes*

Working time

min. 2 hours*, reduced to 90 min.*
if adhesive was applied to one side on previous day

Ready for foot traffic


Ready for covering

see flash time

Minimum application temperature

50 °F (10 °C) at floor level

Joint sealing

after 12 hours*

Final strength

after 2 days*

Frost resistance for 5 cycles

28 °F (–2 °C)

Ordering information

Article Packsize Shipping unit
UZIN WK 222 88437 1.44 gal. / 6 kg / 5.5 l plastic pail
Pallet :

Quality seals and badges

SCS_IAQ_IAG[Building Materials]_1CG

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools