UZIN NC 150 F

UZIN NC 150 F Premium Plus – Fiber Reinforced Self-Leveling Compound

High flow, fibered self-leveling compound

Data sheet

Portland cement-based self-leveling compound for use up to 1" depth application. Excellent flow and working time properties produce level, flat surfaces with good absorbency for most floor coverings and adhesives.

Applications

Interior use only
Producing flat and smooth surfaces for the installation of textile, resilient, ceramic, and engineered wood floor coverings
Use as a self-leveling layer over existing hard surface flooring such as well bonded terrazzo, ceramic tile, stone, and well bonded epoxy coatings
Use over structurally sound concrete, APA Exposure Type 1 plywood and OSB, or equally rated subfloor materials
Renovation of gypsum and Portland cement-based leveling compounds
Use over well bonded adhesive residues including cutback adhesive*
Residential and commercial application
Use with radiant floor heating systems

_{*See “Substrate Preparation” for additional information}

Properties

Fiber-reinforced formula • Increased tensile strength; improves surface integrity; helps mitigate surface map cracking
Versatile • Applies from 1/8"-1" (3-25 mm) depth
Smooth surface • Improves adhesive coverage rate
Low stress • Able to cover difficult substrates
Excellent mixing properties • Pumpable
Standard dry time • 24 hours for most floor coverings

Downloads

Technical data

*At 70 °F (21 °C) and 50 % relative humidity. Surface profile and porosity, application depth, temperature, and humidity will affect dry time and coverage. ** In original unopened packaging, when stored indoors in dry, moderate conditions between temperatures of 50F - 90F (10C - 32C).
Packaging	50 lb. (22.7 kg) paper bag
Storage	up to 9 months^^
Water quantity	6.0–6.5 quarts per 50 lb. bag (5.7–6.1 liters per 22.7 kg bag)
Color	gray
Coverage	58 sq. ft. at 1/8" per 50 lb. bag^* (5.39 m² at 3 mm per 22.7 kg bag)^*
VOC	0 g/L
Working time	20-40 minutes^*
Ready for foot traffic	2–3 hours^*
Ready for covering	see ready for covering chart
Minimum application temperature	50 °F (10 °C) at floor level
Flow ring spread	~6.3 in (160 mm) ASTM C1708
Strength	compressive: 4,500 psi at 28 days flexural: 900 psi at 28 days ASTM C1708 \| air cure only