UZIN HS 200 Premium Plus - Tile & Stone Waterproof Membrane
High performance cement based waterproofing membrane
UZIN HS 200 is a flexible one-component, cement-based waterproofing membrane for tile and stone in interior, exterior, commercial, residential, and immersion applications. Used as a crack-isolation membrane, UZIN HS 200 also reduces crack transmission in tile and stone floors.
Applications
- Over properly prepared concrete, masonry, cement mortar beds, and leveling coat
- Over tile industry recommended backer boards
- Over gypsum wallboard (interior)
- Over industry-standard plywood (interior, dry conditions)
- Over radiant heated substrates
- Over UZIN brand surface preparation products where applicable
- For use in showers, bathrooms, nursing homes, hotels, kitchens, laundry rooms, pools, spas, walkways, pool decks, balconies, building facades, fountains
- For use in steam rooms or steam showers when used in conjunction with a vapor barrier (perm rating 0.1 or less ASTM E-96 Procedure A)
- For contact with Schluter® Kerdi, Kerdi Drain, and other Schluter® components
- For immersion and exterior applications, excellent freeze-thaw, aging, and fatigue resistance
- To prevent in-plane floor cracks from transmitting through tile or stone
Properties
- One-component - No latex admix needed
- Fine textured raw materials - Smooth application
- Tested and approved - Validated performance and peace of mind
- No mesh required to meet ANSI A118.10 - Easier application & reduced potential of weak points
- Variable water ratio - Control viscosity to preferred workability
- Hybrid-set speed - Good working time, yet same-day tile installation
- Light color - Easy to see reference lines
Downloads
Technical data
| Packaging | 27.5 lb (12.5 kg) paper bag |
|---|---|
| Storage | minimum 12 months |
| Layer thickness | 40 mil (1 mm) double coat thickness build 20 mil (.5 mm) |
| Mixing ratio | 3.7 – 4.8 quarts (3.5 – 4.5 liters) per 27.5 lb (12.5 kg) bag For partial bags mix at 3 parts powder to 1 part water |
| Color | Light grey |
| Coverage | 80 – 90 sq. ft. (7.0 – 8.0 m²) @ two 20 mil coats (.5 mm) |
| VOC | 0 g/L |
| Application temperature | 40 – 95 °F (5 – 30 °C) |
| Drying time | Approx. 48 hrs. |
| Working time | approximately 1 hour* |
| Setting time / cure time | 1st coat 2 hours* - 2nd coat 5 hours* |
| Storage | minimum 12 months |
Ordering information
| Packsize | Shipping unit | |
|---|---|---|
| 81088 | 27.5 lb (12.5 kg) paper bag | Pallet : 54 |
Quality seals and badges
![SCS_IAQ_IAG[Building Materials]_1CG](/fileadmin/MAM/151702/SCS_IAQ_IAG_Building_Materials1CG.png "SCS_IAQ_IAG[Building Materials]_1CG")
